英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字,中文词皆可:

repleader    
n. 第二次申诉

第二次申诉

Repleader \Re*plead"er\ (-?r), n. (Law)
A second pleading, or course of pleadings; also, the right of
pleading again.
[1913 Webster]

Whenever a repleader is granted, the pleadings must
begin de novo. --Blackstone.
[1913 Webster]

REPLEADER, practice. When an immaterial issue has been formed, the court
will order the parties to plead de novo, for the purpose of obtaining a
better issue this is called a repleader.
2. In such case, they must begin to replead at the first fault. If the
declaration, plea and replication be all bad, the parties must begin de
novo, if the plea and replication be both bad and a repleader is awarded, it
must be as to both; but if the declaration and plea be good, and the
replication only bad, the parties replead from the replication only.
3. In order to elucidate this point, it may be proper to give an
instance, where the court awarded a repleader for a fault in the plea, which
is the most ordinary cause of a repleader. An action was brought against
husband and wife, for a wrong done by the wife alone, before the marriage,
and both pleaded that they were not guilty of the wrong imputed to them,
which was held to be bad, because there was no wrong alleged to have been
committed by the husband, and therefore a repleader was awarded, and the
plea made that the wife only was not guilty. Cro. Jac. 5. See other
instances in: Hob. 113: 5 Taunt. 386.
4. The following rules as to repleaders were laid down in the case of
Staples v. Haydon, 2 Salk. 579. First. That at common law, a repleader was
allowed before trial, because a verdict did not cure an immaterial issue,
but now a repleader ought not to be allowed till after trial, in any case
when the fault of the issue might be helped by the verdict, or by the
statute of jeofails. Second. That if a repleader be allowed where it ought
not to be granted, or vice versa, it is error. Third. That the judgment of
repleader is general, quod partes replacitent, and the parties must begin at
the first fault, which occasioned the immaterial issue. Fourth. No costs are
allowed on either side. Fifth. That a repleader cannot be awarded after a
default at nisi prius; to which may be added, that in general a repleader
cannot be awarded after a demurrer or writ of error, without the consent of
the parties, but only after issue joined; where however, there is a bad bar,
and a bad replication, it is said that a repleader may be awarded upon a
demurrer; a repleader will not be awarded where the court can give judgment
on the whole record, and it is not grantable in favor of the person who made
the first fault in pleading. See Com. Dig. Pleader, R 18; Bac. Abr. Pleas,
M; 2 Saund. 319 b, n. 6; 2 Vent. 196; 2 Str. 847; 5 Taunt. 386; 8 Taunt.
413; 2 Saund. 20; 1 Chit. Pl. 632; Steph. pl. 119; Lawes, Civ. Pl. 175.
5. The difference between a repleader and a judgment non obstante
veredicto, is this; that when a plea is good in form, though not in fact, or
in other words, if it contain a defective title or ground of defence by
which it is apparent to the court, upon the defendant's own showing, that in
any way of putting it, he can have no merits, and the issue joined thereon
be found for him there, as the awarding of a repleader could not mend the
case, the court for the sake of the plaintiff will at once give judgment non
obstante veredicto; but where the defect is not so much in the title as in
the manner of stating it, and the issue joined thereon is immaterial, so
that the court know not for whom to give judgment, whether for the plaintiff
or defendant, there for their own sake they will award a repleader; a
judgment, therefore, non obstante veredicto, is always upon the merits, and
never granted but in a very clear case; a repleader is upon the form and
manner of pleading. Tidd's Pr. 813, 814; Com. Dig. Pleader, R 18 Bac. Abr.
Pleas, M; 18 Vin. Ab. 567; 2 Saund. 20; Doct. Plac. h.t.; Arch. Civ. Pl.
258; 1 Chit. Pl. 632; U. S. Dig. XII.


请选择你想看的字典辞典:
单词字典翻译
REPLEADER查看 REPLEADER 在百度字典中的解释百度英翻中〔查看〕
REPLEADER查看 REPLEADER 在Google字典中的解释Google英翻中〔查看〕
REPLEADER查看 REPLEADER 在Yahoo字典中的解释Yahoo英翻中〔查看〕





安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • JLink驱动安装与ARM仿真指南-CSDN博客
    本文将指导用户如何在Windows系统下安装JLink驱动,确保与ARM设备的兼容性,并介绍了JLink在ARM仿真中的高级调试功能和操作方法。 还将探讨JLink与IDE及GDB服务器的配合使用,以及对于最新硬件平台的支持更新。 1 JLink驱动安装流程 在安装JLink驱动之前,首先需要检查你的计算机系统环境是否满足驱动的安装要求。 具体操作步骤如下: 打开系统的“控制面板”,并查看“系统”信息,确定你的操作系统版本。 确认已安装的设备驱动程序库中没有与JLink冲突的驱动。 检查计算机的USB端口是否工作正常。 从SEGGER官网下载适用于你的操作系统版本的最新JLink驱动程序包。 按照以下步骤进行JLink驱动的安装:
  • ARM芯片调试-JTAG、JLINK、ULINK、ST-LINK - 知乎
    J-LINK仿真器V8版,其仿真速度和功能远非简易的并口WIGGLER调试器可比。 J-LINK支持ARM7、ARM9、ARM11、Cortex-M3核心,支持ADS、IAR、KEIL开发环境。 V8 0版本除拥有上一版本V7 0的全部功能外,软硬件上都有改进: (1)V8 0版的 SWD 硬件接口支持1 2-5 0V的目标板,V7 0只能支持3 3V的目标板。 (2)V8 0使用双色LED可以指示更多的工作状态,V7 0只有1个LED指示灯。 (3)V8 0增强了JTAG驱动能力,提高了目标板的兼容性。 (4)优化了固件结构,使应用程序区扩大一J-Link ARM主要特点。
  • 嵌入式调试器原理和各类调试器集锦(JLINK、STLINK . . .
    调试器在嵌入式开发调试中的重要性不言而喻,单步、断点和监察的效率远高于串口打印。 但是,调试器对于一般开发人员往往是一个黑匣子。 今天我们就来谈谈调试器的原理,顺便把自己的几类调试器接线和注意事项记录下来,以便查找。
  • JLink、RV Debugger及串口下载使用体验及踩坑 - RISC-V MCU
    重要说明: 在使用zadig替换驱动后,将无法正常使用JLink工具,如果您同时需要调试ARM板子,请不要使用上述操作。 但是根据阿莫BBS上的帖子,V10及以上的调试器可以正常使用。 使用感受:可以满足日常调试下载使用。 但是由于我的这个(非官方)调试器不带串口,调试时需要使用额外的串口工具,略显不便。 补充:使用V11版调试器
  • J-LINK V9:ARM烧录编程调试神器,V10 V11 V12版本全面 . . .
    在嵌入式开发的世界里,J-LINK V9无疑是一款备受追捧的工具。 无论是V10、V11还是V12版本,它们都以其卓越的性能和广泛的兼容性,成为了开发者手中的利器。 本文将深入探讨J-LINK V9的不同版本,揭示其背后的强大功能,帮助你更好地理解和使用这一神器。
  • Supported CPUs and devices - Segger Microcontroller Systems
    Any microcontroller, MPU, SoC with a supported CPU core with its debug interface accessible is supported and can be fully controlled by J-Link
  • J-Link 用户指南
    J-Link 是 SEGGER 公司为支持仿真 ARM 内核芯片推出的 JTAG仿真器。 配合 IAR EWARM,ADS,KEIL,WINARM,RealView 等集成开发环境支持所有 ARM7 ARM9 内核芯片的仿真,通过 RDI 接口和各集成开发环境无缝连接,操作方便、连接方便、简单易学,是学习开发 ARM 最好最实用的开发工具。
  • ARM仿真调试器那些事儿-腾讯云开发者社区-腾讯云
    从上述两大阵营可以知道主流半导体厂商为了加强自己的产品生态,都会基于自有MCU推出调试器,但不通用。 而市面上最流行的通用性调试器是SEGGER公司的通用型J-Link调试器。 如果问100个 单片机 开发工程师是否用过J-Link仿真器,相信其中的90个会说Yes。
  • J-Link 仿真器 说明书 (本手册适 V6. 0、V7. 0、V8. 0 版本的 . . .
    J-Link 是 SEGGER 公司为支持仿真 ARM 内核芯片推出的 JTAG 仿真器。 配合 IAR EWARM, ADS,KEIL,WINARM,RealView 等集成开发环境支持所有 ARM7 ARM9 内核芯片的仿真,通过 RDI 接口和各集成开发环境无缝连接,操作方便、连接方便、简单易学,是学习开发 ARM 最好最实用的开发 工具。
  • [Debug--JLink]ARM调试器J-Link使用的一点问题的记录
    看来问题原因是J-Link的固件代码不能支持更新后的驱动程序,解决方法可以有两种,一种是将固件代码升级,固件烧写要用到SEGGER的J-LinkConfigurator工具,步骤可以搜下具体的烧写步骤,而且要确定好升级的固件版本。





中文字典-英文字典  2005-2009