英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：

romaunt    

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • 10 Steps to Improve Pipetting Accuracy - Thermo Fisher Scientific - US
    When aspirating liquid, hold the pipette vertically and pull the pipette straight out from the center of the reservoir This technique is especially important when pipetting small volumes (less than 50µL) Holding the pipette at an angle as it is removed from the liquid alters the aspirated volume
  • General Troubleshooting – Liquid Leak Test Testing 12 Point Pipette . . .
    A simple liquid leak test will help determine if a pipette sealing system (i e piston, seal, shaft, o-ring, and tip) is working as it should, and may uncover hidden problems not seen to the naked eye
  • What to Do When Your Pipette Is Leaking
    Leaky pipettes cause decreased accuracy in results and can be a hazard in the lab, contaminating other samples and bench space Run through the list below to check for what the issue with your pipette may be and how to fix it
  • Troubleshooting for ‘’No Liquid Detected” or “Not Enough Liquid Detected”
    This article will help you to troubleshoot issues when no or not enough liquid is detected in the pipetting wells The incorrect handling of liquids can lead to various errors For example, the user prompt “No Liquid Detected” or “Not Enough Liquid Detected”, can be prompted with different root causes Since the instrument consists of
  • 8 common pipetting errors and how to avoid them | INTEGRA
    Read on to learn about the most common pipetting errors, how to avoid them and how our pipettes can support you The impact of pipetting errors is often underestimated, but even slight discrepancies at the bench can accumulate to form vast inaccuracies in your data
  • 100 mL pipettes drips when taking up liquid, what to do?
    Some liquids you just have to go fast because they won't stay in a pipette Minimize the travel distance between the containers you're pipetting between, e g hold it right next to the other container
  • Micropipette Troubleshooting: How to Fix Common Pipetting Issues
    Learn essential tips for troubleshooting micropipette issues From inaccurate volume settings to leaking tips, find solutions to fix common pipetting problems and improve accuracy
  • A Guide to Proper Pipetting - Lab Manager
    To prevent heat transfer from hand to pipette, pay attention to how you are holding the pipette If pipette tips leak, be sure to use original or recommended tips Even if an error in use seems small, the impact can be significant
  • How to Properly Pipette – GMP Plastic
    Hold the pipette vertically when aspirating to prevent liquid from entering the barrel Pre-wet the tip by aspirating and dispensing the liquid at least once before taking the final volume Immerse the tip just below the surface of the liquid (1-2 mm for small volumes and 3-5 mm for larger volumes) to avoid air bubbles
  • Pipette’s Common Faults and Solutions - Hawach pipette
    There is a residual liquid in the pipette of the pipette This happens because the pipette is not suitable and should be replaced immediately with the original pipette 3 The pipette is clogged, the amount of liquid absorption is too small





中文字典-英文字典  2005-2009