英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
tors查看　tors　在百度字典中的解释百度英翻中〔查看〕
tors查看　tors　在Google字典中的解释Google英翻中〔查看〕
tors查看　tors　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • What is tors? - Blue Traxx Forum
    TORS removal Procedure Stage 1 Free!: 1st remove the “brain box”, mounted on the frame just above the left carb is a small black box Unplug it and unscrew from mount Seal the plug end to the wiring harness w silicone or electric tape Start banshee and ck for proper throttle operation 2nd remove the parking break sensor Remove front
  • Throttle Override System (T. O. R. S. ) ??????? | Blue Traxx Forum
    I've been contemplating moving to a twist throttle however I'm not able to get a straight answer from Motion Pro or Alba on the methodology used to override the TORS system on the YFZ The thumber has this hooked into the mechanism and the aftermarket Motion Pro twists don't have anything
  • TORS REMOVAL - HOW??? | Blue Traxx Forum
    I had read a post on Hot Wiring tht TORS so you disactivate it How can this be done without buying a TORS removal kit???? I remeber somthing like you splice some wires together
  • tps and tors work around - Blue Traxx Forum
    The tors system can be bypassed by cutting the wires that go into the switch on the throttle and connecting them together I had to do this when I put on the 400ex throttle
  • removed the tors - Blue Traxx Forum
    If you take off the the TORS you need to drill and tap into the side for an idle screw , since you removed the other idle screw by removing the TORS I also had electrical problems Mine happened to be in the coils in the magneto Electrical is the worst because there are so many possibilties for a bad spot
  • Stock Banshee Carb TORS IDLE problem - Blue Traxx Forum
    I have a 2003 Banshee and when the TORS are connected it will start on kick and idle really high but the TORS idle screws wont adjust the idle down When i pull the choke to 1 2 choke it will run at a normal idle and the TORS idle screws will adjust it When i disconnected the TORS the Banshee
  • Removing TORS and kill switch on blaster. . . HELP?
    Hi I was curious to see what the best way to remove the TORS is I am rewiring my project blaster and would like to remove the TORS and the stock bar mounted light kill switch I will be adding a momentary contact kill switch from a YZ bike instead From the looks of my wiring diagram I should
  • Banshee TORS removal. . does it help? | Blue Traxx Forum
    If the TORS system on the Banshee carb is removed is getting it jetted easier Or does it help anything at all? :shrug:
  • 2007 yfz450 - Blue Traxx Forum
    yes the tors will create a no spark you have it backwards for the jumper, the tors is the 2 wires and the tps is the three unplug the tps and the machine defaults to the wot timing curve and jump the 2 tors wires here is the original post the whole post is 08 yfz wont start ignore the carb stuff i just copy and pasted the writeup
  • Important post for YFZ450 owners! - Blue Traxx Forum
    the TORS switches can be messed up by improper traction on the throttle cable, and this could cause it to run rough or not at all The switch would have to be reset this instruction will save a FEW people a lot of grief





中文字典-英文字典  2005-2009