英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字,中文词皆可:


请选择你想看的字典辞典:
单词字典翻译
narcotizing查看 narcotizing 在百度字典中的解释百度英翻中〔查看〕
narcotizing查看 narcotizing 在Google字典中的解释Google英翻中〔查看〕
narcotizing查看 narcotizing 在Yahoo字典中的解释Yahoo英翻中〔查看〕





安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Pop Rivet vs Screw. . Which is stronger? - Boat Design Net
    A big headed pop rivit with a flat washer on the back side will never come loose !! I remember once using coins as washers , the big ss washer was a dollar each so for 50cents i used a 50cent coin !!! Half the price and just as good NZ 50c works well !!
  • Aluminum Rivets | Boat Design Net
    Blind or 'pop' rivets (Pop is a brand of rivet but has become synonymous with *cheap* blind rivets) will leak unless sealed with a marine grade sealant Even the best blind rivets costing a buck a piece are still structurally inferior to solid rivets So hardware store blind rivets don't even begin to compare in strength to solid rivets
  • Riveting plywood to aluminum boat - Boat Design Net
    I removed the old decking from my aluminum boat (it was 3 4" treated plywood), and it was fastened using rivets I measured the rivets and the diameter was somewhere between 3 16" and 1 4" (my micrometer is broken) My local hardware store sells a pop riveter for 9 bucks It says that it will handle up to 3 16" rivets
  • Closed end rivets | Boat Design Net
    I suspect pop rivets need something stronger than alloy mandrels to pull them up nice and tight OK for temporary repairs, maybe, with pop rivets, but if there was a pop rivet system that worked for boats long term we'd have seen it on production boats where rivets are still in fashion, like north America
  • Rivets. . . . re-installing rubrail | Boat Design Net
    A reasonable option is to used sealed SS pop rivets Bolts will probably interfere with putting the rubber back in the extrusion You need to have a pretty good touch to get this important sight line to run true after it has been removed I'd use strapping tape between each hole to hold the extrusion when drilling the hull
  • Rivets in Mast - Boat Design Net
    the rivets pictured are commonly called pop rivets or blind rivets and are very easy to remove with a good quality battery drill and a small nail punch or drift There is a central hole where the shank broke out - by drilling this with a drill a little smaller than the original hole, until you hit the remains of the shank
  • Patch My Leaky Aluminium With Fibreglass? | Boat Design Net
    I have drilled out some rivets and put new pop rivets in and I've bogged up holes with epoxy resin type stuff Not sure how good this kind of fix is Seems to me a good fix would be to coat the whole bottom - or the bands across the boat where the seats have been rivetted on and the long band along the keel where it was rivetted on - with
  • Aluminum build with RIVETS? - Boat Design Net
    Aluminium alloys used for rivets include 2017A, 2024, 5056, 5052, 5754, 6061, 6082 and 7075 Sounds like the combination of adhesive and a serious number of rivets could produce a "one off ' with a simple method
  • rivets or screws? - Boat Design Net
    The problem with pop rivets or traditional rivets in wood is that they pinch the wood, breaking the fibers, weakening the structure Screws, with appropriate-sized pilot holes are the best way to go, so long as you can use enough of them without worrying about sheering between the screws
  • Fiberglass boat paint help | Boat Design Net
    15’ runabout 1971 Johnson 100 20’ Lowe flat bottom 1977 mercury 700 thunderbolt





中文字典-英文字典  2005-2009